|
Function
The Intermech Rhino 4 Stage compressor is used to compress natural gas from 0.5 to 10 bar up to 250 or 310barG at a rate of 500 to 2500m3/hr. It runs at up to 1800rpm enabling direct drive from either electric or gas prime movers.
|
|
Features
Sealed crank case, direct drive compatible, balanced for minimal vibration
|
|
Specifications
• Up to 200kW
• Two throw
• Horizontally opposed
• SG Iron Castings
• Synthetic rings are used on all stages for low friction and long life.
• Efficient rod seals – minimises uncontrolled crankcase oil migration to compression cylinder
• “Point to point” lubrication to significantly reduce wear on valves & rings while minimising oil losses in the gas stream
• Oil top up without de-pressurising the crankcase
• Compact 4 point mounting design – easy to package
• Light weight components – easy on the serviceman
|
|
Codes
• Design standard ISO 9001:2008
• Design codes NZS 5425 AG 504 NFPA 52
|
|
Maximum Dimmensions
• Length 2050mm
• Width 950mm
• Height 600mm
• Weight 780 kg
|
|
Compressor Service Characteristics
• Intermech recommends the use of Atlas Copco Hyper Oil in all our compressors with daily top up as required.
• Valves should have 6000hr overhaul.
• Overhaul 15000hr.
• Main bearings 35000hr if required.
|